If you use multiple pedalboards and amps then the Boss LS-2 Line Selector pedal is going to make your life a whole lot easier. Switching: One of the best things is that you can switch between the A/B effect loops, A/B/bypass, A+B mix/bypass, and Output select (e.g. for switching between amps). So easy to switch between solo and rhythm sounds that consist of two or more pedals. The footswitch itself is as sturdy as any Boss pedal, and the one on the LS-2 is silent and 100% efficient. Bypass is true, didn't notice any signal loss. For extra functionality, the LS-2 has six different loop modes which change how the switching works. A whole host of options open up using these modes which include:

Pedals like the Cry Baby Mini (I put it in Loop B) may be a bit hard to switch on and off live, so using it in the LS-2 loop makes it easy to call upon it without any fuss I'm pretty sure a few of these don't blend the signal (Lehle and Boss AB-2 for example), which is primarily what I'm after so unless I'm told otherwise they're out for me. Just thought I'd put them in the list for everyone to have a look at incase they're of use to them. These figures will vary depending on the actual conditions of use. Accessories Leaflet ("USING THE UNIT SAFELY,""IMPORTANT NOTES," and "Information")Accessories: Owner's manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Carbon-zinc battery (9 V, 6F22)

If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered The Boss LS-2 Line Selector gives you an easy and convenient way to switch the settings of multiple effects and amplifiers or route input and output signals. Line Selector for Simplifying Your Setup With the BOSS Line Selector, two different effects chains can be switched: one for clean / crunch sounds (in the 'flavour' of Overdrive, Chorus, Compressor, Reverb, Flanger, etc.), and one for the lead sound (e.g., Distortion, Delay, Pitch shifter, etc.). Now you can switch between the two sounds comfortably with the LS-2: the required pedals can be activated in advance and are then available via a switching process. Further applications of the LS-2 include the possibility to control several amplifiers, and the pedal can also be used to supply a plurality of effect pedals with a power supply (sufficiently dimensioned). However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.

Oh no! Why did I get blocked?

The Boss LS-2 Line Selector Guitar Pedal is the perfect tool for any guitarist looking to effortlessly switch between multiple amplifiers and effects devices. With its compact design and intuitive controls, this pedal allows you to easily connect and route your signals to create a wide variety of sonic options. Equipped with two line loops and six modes, the LS-2 provides endless possibilities for your guitar setup. Whether you want to switch between different effects pedals or amplify your sound through multiple amps, this pedal ensures seamless transitions and precise control. Featuring a mode selector switch and level knobs for each line loop, the LS-2 gives you precise control over your sound. With its mode selector switch and level knobs, you can easily adjust the levels of each loop independently. This allows you to fine-tune your tone and create dynamic and expressive performances that are tailored to your specific needs. Can anyone point me (and anyone else who's interested!) in the direction of other options for clean/loop blending and A/B blending (preferably in one unit)? I'm just trying to weigh up all the options so I only have to fork out once! So far the names I've seen are: Providing two line loops and six looping modes, even the most complex setups can be managed with ease thanks to the Boss LS-2 Line Selector pedal. Boss LS-2 Line Selector Pedal Key Features:

Not only does the LS-2 offer exceptional functionality, but it also doubles as a power supply for several Boss compact pedals. Simply connect it to an AC adapter, and you can supply power to your other pedals, streamlining your setup and reducing cable clutter. Plus, with its compact dimensions, the LS-2 easily fits into any pedalboard and won't take up valuable space. Discover the ultimate control and sonic possibilities. AC adaptor (PSA series: sold separately) Current Draw 30 mA Expected battery life under continuous use Carbon: Approx. 14.5 hours On the surface, this pedal is perhaps not quite as exciting as a new high-gain overdrive or an extreme fuzz. However, the LS-2 is a bit of a Swiss Army Knife: it can perform a couple of very handy tasks that make it indispensable for many, many players. For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs. url="http://www.banzaimusic.com/Banzai-Dual-True-Bypass-Box-pr-17667.html"]Banzai Dual Looper[/url]Please note that this extended warranty is currently only available on products sold within the UK, EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided. By using the LS-2 as a power supply, you can save space on your pedalboard and reduce clutter in your setup. You can also simplify your power management and avoid potential issues with ground loops or noise interference that can occur when using multiple sources. Power up to seven Boss compact pedals, making it a go-to tool for professional musicians who rely on multiple effects to achieve their desired sound. Specifications and a looper with an A/B output: [url="http://www.banzaimusic.com/Banzai-A-B-True-Bypass-Box-pr-17666.html"]Banzai A/B Looper[/url] This pedal is more than just a versatile sound control tool, it also serves as a power supply for multiple Boss compact pedals when used with an AC adapter. This feature is incredibly convenient for musicians with extensive effects setups, as it eliminates the need for multiple power sources.

Collection and delivery costs are included for the first 2 years in the event of an item becoming faulty Nominal Input Level -20 dBu Input Impedance 1 M ohm Nominal Output Level -20 dBu Output Impedance 1 k ohms Recommended Load Impedance 10 k ohms or greater Bypass Buffered bypass Controls MODE selector switch Compact line selection pedal for connecting and switching between multiple amplifiers and effects devices They also do a single looper: [url="http://www.banzaimusic.com/Banzai-True-Bypass-Box-pr-17668.html"]Banzai Loop/Bypass[/url] The LS-2 is worth its weight in - well, not gold, but close. A while ago, I've bought a second unit to gain more flexibility in experimenting with groups and chains of many various pedals, looking for specific sounds. I wanted to be able to switch between groups at the push of a button, and easily compensate for volume differences between the groups. The LS-2 does all that.From complex soundscapes or simple, clean tones, the LS-2 provides you with the flexibility to do it all. And with the pedal switch, you can easily activate or bypass the selected loops, giving you instant control over your desired sound configuration. Effortlessly create the perfect tone for any performance or recording session. More than a control pedal A + B Mix / Bypass - Switch between both loop A and B together and bypass. Blend the two loops using the line controls Power Supply: Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately) Many musicians often eschew away from buying parts that "seem to sound like nothing" for years, forgetting how much such devices can actually make life easier for them.