Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries. Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. The Green Premium eco-mark stands for complete, transparent, and easily available information about products

To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open. In addition to its heating control functions, the Digistat+3 has a built-in frost protection feature that ensures the temperature never drops below a certain threshold, preventing freezing and potential damage to the heating system.

The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple! These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating

With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers?This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. Reset the Receiver by pressing the button for about 15 seconds until you see a red light followed by flashing orange/green which shows it is in pairing mode. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. The Drayton Digistat+3 is a thermostat designed for controlling heating systems in residential and commercial buildings. It is manufactured by Drayton, a well-known company in the field of heating controls.

When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat? However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process:

The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly. The thermostat also features a "holiday mode" that allows users to set a lower temperature while they are away, further improving energy efficiency. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode?Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost? Our Green Premium eco-mark encompasses a broad range of environmental criteria, meeting and exceeding international regulations and industry standards: When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event. Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? The thermostat is designed to be versatile and compatible with a wide range of heating systems, including combi boilers, system boilers, and electric heating systems. It can be used as a wired or wireless thermostat, depending on the user's preference and the specific installation requirements.