Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. TV with optical audio output, broadband Internet, and a Sonos app. Internet-connected TV not required. only network configurations are not supported—you can either change the router settings to 802.11b/g/n or connect a Sonos product to your router. Improper or inadequate wallmount installation could cause your device to fall, resulting in personal injury.Two 10/100 Mbps Ethernet ports. You can plug a Sonos product directly into your router if your WiFi is unstable.

Surely they are aware that if you wish to adhere to electrical codes, you cannot simply run the power cord through the wall. It needs to have an outlet behind the speaker. That is the main concern. And it applies to nearly all soundbars that are powered via high voltage. Note: There are 2 spare screws (and anchors) included in the kit. Use these to provide additional reinforcement if you’d like.Clean non-fabric portions only with a dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products. Keep the fabric free from dust, pet hair, and other fine particles. Use a vacuum with a hose or non-moving bristle attachment to clean the fabric. Do not vacuum with a rotating bristle attachment. A lint brush can be used to smooth out visible lines in the fabric. Do not clean fabric with a lint roller. Six mid-woofers give you the full range of sound effects and music from the left and right channels, and crisp, clear dialog from the center. Mid-woofers act together as a phased speaker array so what you hear matches what you see on screen. As a custom installer, I will find a way to do it. I have 2 ideas in mind and will post an update when I have figured it out. But manufacturers need to take some thought about how people are going to use their products and design them accordingly. I cannot see a way for the wall mount to both conceal wires and meet building codes. The hole in the middle is small. Since the mount is flat against the wall, standard outlets, which all have faceplates, will not work with it.

I have a house under construction (framing) and want to do this right, but Sonos just doesn't provide enough information. You can mount Playbar to a wall above or below a wall-mounted TV. Use the Playbar wall mount kit. You can buy it on www.sonos.com. Follow the instructions in the kit. Nine Class-D digital amplifiers perfectly tuned to match the nine dedicated speaker drivers and the acoustic architecture. Building codes don't allow power cables to be buried in the wall without conduit and electrical boxes - so how does the wall mount work with standard electrical boxes and trim? Is that hole in the middle the size of a standard electrical box?

Here's how to choose

Playbar connects to your TV using a single optical cable and plays all sources connected to the TV, including cable boxes and game consoles. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. I want to do this right... so I decided not to wall mount the wall mount. Instead I modified the soundbar accessory for my TV mount to accept the wall mount. The house is not finished yet, but I verified that the Playbar mounts directly and neatly below the TV. I already have the TV mount (Sanus XF228-B1) and have modified the soundbar accessory (VMA202) by removing the universal soundbar attachment and replacing it with the appropriately drilled and tapped Sonos wall mount. That is one option....but I believe SONOS recommends the playbar to be 2" away from the TV when mounting it below. Maybe it is only 1". Although there are ways to fill in that 1" gap with some kind of material, I would rather find a solution that will work well regardless of what TV and mount is being installed.