If you are considering this padlock for lockers then you may also want to consider the " Master Key" version which enables you to override a batch of locks with a single key held by staff. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. When removing or exchanging it again, the screw with part number 07 12 9 907 489 must be installed instead of the screw with part number 07 14 9 185 673. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. The precision 5 pin tumbler with self-locking mechanism makes the brass padlock highly secure against picking, while the hardened steel shackle and double bolted case help protect the lock from force attacks.

The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements.I chose this padlock because, from its description, it appeared robust, had a large shackle to fit my metal gate frame, appeared to be made of rustproof materials and came with three keys. The highest quality brass, non-corrosive internal mechanisms and the largest number of differs make it the best brass padlock on the market. Lock features :- Hardened steel shackle, Double bolted, Quality pin tumbler mechanism, Self locking mechanism.

The Abus 65/50 Series Close Shackle Padlock is suitable for low to medium security requirements and is also suitable where a strong requirement for service performance and durable lifetime. We have been using them for over 3 months now outside on gates all around the school and they have been well tested. The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required.You can send us your key so we can copy it with an orginal ABUS Blank, this can be sent to our contact address on the contact us page. A security level number 6 long shackle solid brass 50mm padlock with 5 pin precision pin tumbler and hardened 80mm x 8mm diameter alloy steel shackle. The stainless brass casing and stainless steel mechanism also make it highly resilient to all types of weather. We would, however, recommend the weatherproof range if the lock will come into contact with salt water or be used outdoors for prolonged periods.

The shackle is made from hardened steel and has ABUS’s NanoProtect chrome plating on so will protect the shackle from rust/corrosion. Key numbers are normally located in one of two places, either on one of the original ABUS keys like the diagram shown below.The precision 5 pin tumbler with self-locking mechanism make the brass padlock highly secure against picking, while the hardened steel shackle and double bolted case help protect the lock from force attacks. It is ideally suited to residential applications such as front and back doors but also on a range of business applications for warehouses, schools and councils.