Joined in 2023 
82 
63 About this deal
Even though your TV might have one of those VESA sizes above, I have ran into a few problems with certain makes of TV’s but i will explain about that later in this post.
Mounted TV, and then spent some time making sure everything level, a bit of a perfectionist so did take some time, options for levelling TV on bracket, so even if you have mounted the bracket slightly off level you can adjust TV accordingly and all is not lost, with bracket behind TV you would not be able to tell anyway. As long as the vesa measurements match up with any of the measurements Invision cover, then yes definitely. But if your experienced (like me, I hate blowing my own trumpet,ha) it takes forty five minutes tops! Anyway, once we'd sorted out the height (standing the TV on blocks of wood to raise the height until we reached agreement), I temporarily fixed the rear half of the bracket onto the front half. It has a reinforced wall panel to distribute the load and give you confidence in the installation of your TV (maximum weight 50 kg).So the only way to deal with this is to use a TV bracket that extends away from the wall, at least 500mm (half a metre).
Our compatibility promise is a commitment to ensure you can mount your TV to our bracket whatever the model. Read the spec sheet for the bracket and make sure it handles your screen size (this is measured in inches), weight (measured in kilograms) and the size of the VESA mount (measured in millimetres). Eliminate annoying glare with easy tilting operation and customize your viewing angle from anywhere in the room with up to 160° horizontal full motion swivelling feature left to right and vertical tilt angle ranging from -5° to +8°.Spacers and washers can be used when shorter fixing bolts are required, clearance for cable access or if the rear of the TV is not flat). I used the smaller ones on my TV, but if your VESA holes are sunken, you might need to use the larger ones. For us, the biggest pro of wall mounting your TV is that it saves space – getting the telly up high means you don’t need a large stand or cabinet taking up valuable square inches, giving you more room for sofas, accent chairs or a children’s play area. Lay the bracket flat and extend the bracket arms by holding the wall plate and pulling upwards on mounting plate. At the same time, using a tilted or a motion mount gives you more flexibility on how the screen is positioned, letting you swivel the display away from glare pouring through the blinds.
Throw the spirit level away and use your own, and use a socket set instead of the spanner to tighten up the coach screws, much easier! The mount is equipped with stress tested load-bearing compression hinges to eliminate the risk of bending when fully extended. We love that it supports a variety of TV screen sizes (37 to 70 inches, and up to 50kg) and that you can reduce cable clutter by passing wires through the bracket itself. This easy to install ultra strong double arm TV bracket includes a 6 inch triple axis spirit level to make sure your installation goes to plan so you can be hooked up to the TV the same day.Eliminate annoying glare with easy tilting operation and customize your viewing angle from anywhere in the room, up to 160° horizontal full motion swivelling feature left to right (depending on the size of your TV) and vertical tilt angle ranging from -5° to +8°. This Invision bracket is rated at 50Kg and my TV weighs around 10Kg, so it really shouldn't have to break a sweat holding my TV, and indeed it doesn't. com Limited is an Appointed Representative of Compare The Market Limited who is authorised and regulated by the Financial Conduct Authority.
Great Deal 
New Comment