With a wide selection of colours available you will be able to easily redecorate your garden to your liking.

Before application can begin, ensure that all surfaces are clean, dry and free from any loose debris. Not just for wood, it can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden.Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. Beautiful matt colour which enhances the grain of natural wood, with 6 Year weather protection on wood. There’s a wide range of colours available so you can mix and match shades for a stylish garden colour scheme that reflects your personality. Easily applied with a brush, roller or sprayer, this beautifully designed paint is available in 2 sizes including Cuprinol Garden Shades 1L and Cuprinol Garden Shades 2.

The paint can also be applied to terracotta, brick and stone, letting you enhance and decorate your garden to your hearts delight. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Please Note: coverage can vary depending on application method and the condition and type of surface - not suitable for decking. If this has been done without success you could cover the area in sodium bicarbonate and leave for 20 mins and then scrub with a brush and warm water. This quick drying paint is touch dry within 1 hour, and recommends leaving between 2-4 hours before application of the next coat can begin.Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The special pigments used in the paint ensure a rich colour and allow the natural texture from the wood to shine through. After almost nine months of successful collaboration, we're delighted to share some significant news with you. Before moving onto the next phase, go back over what you have just done with the next coat before moving on to the next phase.

On areas subject to wear, such as garden furniture, allow a few days before heavy use or contact with soft furnishings.It can also be applied on terracotta, brick and stone, bringing our beautiful rich colour into the garden. Credit subject to status, UK residents only, Industrial Tool Supplies (London) Limited acts as a broker and offers finance from PayPal credit. If you can see any area's that might want an extra coat, get that done before starting another whole phase. covers up to: Smooth planed wood - Brush: 10-12m²/Spray: 4-5m², Rough sawn wood - Brush: 3-5m²/ Spray: 2-3m². If your chosen surface has already been previously coated with paint or varnish, it must be stripped back to its original bare wood before Cuprinol Garden Shades can be applied directly.