Mitre Shears/Mitre Angle Trim/PVC Decking Cutter

Product Information

Top of the range mitre saws come with laser technology for cutting accuracy and we also have corded and cordless options available, should this be an important consideration factor. Made from high-quality hardened and precision ground steel, the Durston mitre cutter jig is designed to make mitre cuts a breeze. The timber is clamped in place inside the box and then cut with the mitre slots acting as a guide for the saw. A Mitre Saw usually consists of a circular saw blade mounted on a sturdy pivoting arm that allows adjustment to precise repeatable angles across multiple axis.

This fixes the final fence position and you can now bring the fence forward to make a light first pass, then move it back a little for the second pass, and so on until the final pass is made with the fence back against the stops.Remember that you have to establish new cutter and fence positions every time you use a different thickness material; so keep your successful test cuts to use as setting pieces for future jobs. If you need a quick cut in a tile or other piece of masonry an Evolution Mitre Saw and diamond tipped blade will get the job done. In the following example we used 20mm thick hardwood and went through the set-up routine from scratch. The lock mitre cutter gives a tremendously strong corner joint with a neat mitred appearance, and can also be used for flat joints in made-up panels, doors etc. Note that very slight adjustments of your fine adjuster will affect the fit of the two pieces so proceed in small steps.

During assembly, It is highly recommended to reinforce the union of the structural pieces with a little PVA glue to achieve a lifetime of use.A mitre saw makes cutting wood at precise angles a breeze, with a swing-arm mounted saw for flexibility when choosing which degrees to cut at. With blade sizes from 185mm to 255mm, Evolution Mitre Saws will cover you for all of your cutting needs. To cut an actual 4x4 (100 x 100mm) wooden post in a single pass a blade larger than 300mm would be required. Precise set-up is essential to get good results with this cutter, and the set-up is specific to the thickness of your workpiece.

All Evolution Mitre Saws have can be connected to powered dust extraction systems to help keep your workspace clean. Choosing your power source: 240v tools are used with normal mains power whilst 110v tools are used on construction sites for safety reasons. At Evolution, we have several Mitre Saw Stands available, as well as special Mitre Saw bundles with the stand included. Dual purpose cutters which can be used for producing either a neat 90° corner joint or a joint for edge jointing boards together. Whether you are a picture framer, a carpenter or a cabinetmaker the need for accurate mitres is paramount.The outline of the cutter is rough-cut and the fence is finished by taping the MDF to it and, with the cutter set to its initial height (see below), slowly pulling the fence forward past the cutter to complete the cut-out. Our adjustable depth stops mean you can make perfectly accurate trench cuts with almost zero variance across the entire trench. Whether you’re looking for extendable sides that can be adjusted to suit your workpiece or a rolling stand that’s easy to manoeuvre, choose from our array of universal mitre saw stands. The maximum cut depth on a Mitre Saw depends on the blade size and the clearance around the blade guard.