Paslode 013060 Impulse Cleaning Kit for the Paslode Impulse guns

Product Information

Carburetor degreaser doesn’t cost all that much and some claim it’s a brilliant alternative for Paslode nail guns (except when the nailer is super filthy). Spray the cylinder head assembly liberally and get rid of the gunk with lint-free cloth/ compressed air. Regular cleaning (depending on use) is essential to keep your Paslode nail gun firing and running smoothly. Any of the two substitutes we have explained here will do the job and can be a good way of saving your hard-earned money. These products are strong enough to blast away oil, dirt, carbon deposits, and more from overly sensitive electrical equipment including pneumatic and cordless nail guns.

In a nutshell, using it as a Paslode nail gun oil substitute will be calling for trouble and more expenditure down the road unless you can, of course, prevent it from getting on the sensitive parts somehow. Your last step is re-oiling -use the right Paslode gun oil (or a good paslode oil alternative as well) for lubing- be sure to place a couple of drops around the tool’s cylinder wall. The videos below from Paslode demonstrate how to properly clean and lubricate your nailer. They’re easy to follow with simple instructions.

Next, disconnect leads from your fan motor and the spark plug to reach the tool’s cylinder head assembly. Don’t worry if a small amount of smoke comes out from your nailer – this is normal. Your Paslode Also Needs Regular Servicing So your Paslode’s now clean – hopefully it seems refreshed. But is it firing like it should? As well as regular cleaning, your nail gun also needs new spare parts fitted every now and then. The o-rings, battery pads, filter, etc. get worn out and need replaced. Records the default button state of the corresponding category & the status of CCPA. It works only in coordination with the primary cookie.

Don’t panic- it’s alcohol based so it will not hurt the O-rings or other seals (you probably know that brake parts feature plenty of rubber) or even electrical parts of the tool. Here are some great options if you’re looking for an equally powerful but cheaper Paslode degreaser cleaner alternative.. Paslode degreaser cleaner alternative – 2 recommended options that work as well Side Note: Please follow the instructions printed in the manual for your specific Paslode model all through. This prevents you from spreading dirt or scratching the internal parts of your nail gun. Make sure you properly tighten all screws when reassembling your nail gun.

Paslode Cleaning Do’s & Don’ts

Don’t think of carb degreaser cleaner though- it has some terrible ingredients and hardens or dissolves plastic, rubber, and the like. If you don’t want to splash out on the pricey Paslode nail gun cleaner, try these Paslode degreaser cleaner alternatives. 1: Brake cleaner Now spray the filter and wipe it clean either with a lint free cloth or by blowing through with air. Do you want to learn how to clean your Paslode nail gun? It’s easy and only takes minutes! Read on to find out how. Paslode Maintenance Is your nailer not firing properly? See our handy Paslode Troubleshooting Guide to help you diagnose the problem.

Using a nailer with loose screws can cause damage to both you and the tool. Test your nail gun after cleaning. If available, it’s advisable to hit the nail gun with a bit of air to mop all the spots you can’t wipe.

How to clean a paslode nail gun with brake cleaner for paslode

Paslode recommend that you use their official cleaner as, again, it’s specially formulated for their nailers. Other cleaners may chemically damage your nail gun’s electrical, plastic and rubber parts. They may also leave a residue which can cause damage to both you and your nailer. Use a clean, lint-free cloth. Most importantly, there’s no risk of damaging the nailer’s plastic, rubber,and electrical parts. ALSO READ: paslode nail gun repair manual It’s specially formulated to withstand the high temperatures generated by Paslode nail guns. Other lubricants can cause rapid build-up of combustion residue which will affect your nailer’s performance and require more frequent cleaning. It can also lead to premature parts failure and, in the worst case, an unrepairable nail gun. Use official Paslode degreaser cleaner. That said, avoid using a brake pad cleaner or any other unofficial cleaner if you’re still within the warranty period -it will void it.

We’ll expertly test, clean, service and repair your nail gun, then return it to you working like new again. A service and repair is a worthy investment for maintaining your Paslode’s performance. After all, you don’t want your work to suffer! What’s included in our Approved Paslode Service? Now proceed to spray (and wipe the deposits) the main cylinder along with the piston driver assembly. Something else: You’re advantaged when you use the recommended paslode cleaner and oil – it’s specially engineered for the tools and cleans wonderfully. This video shows you how to clean a Paslode framing nailer (IM360Ci, 360Xi, IM350) or positive placement nailer (PPN35Ci, PPNXi):

We Hope Our Paslode Cleaning Guide Has Helped

This video shows you how to clean a Paslode finish nailer (IM65, IM65A, IM50) or multi-purpose nailer (IM45):