The icon 72683501 is mains voltage(240v) IPX4 rated and is suitable for installation into zone 3 of a bathroom or toilet. It may be flush mounted in either the wall or ceiling and with a low profile fascia, sits unobtrusively in any room. With an air extraction rate of 76m3 per hour, it easily surpasses building regulations. Adjustable humidity setting between 40-90% RH, adjustable timer and momentary pull cord to override (HTM) PRHTM - Infrared - Passive infrared activation with adjustable humidity setting and adjustable timer overrun.

The Airflow ICON15 72683501 ventilation fan is suitable for fitting into walls or ceilings in areas such as shower rooms, bathrooms, en-suites and toilets. Enter ICON – the new lens that provides a reassuringly simple and convenient solution to your RGP fitting needs. Note: this fan is the basic version coming with remote switching; if you wish to add a timer module, a different face plate, or any other module, see the options below. iCON15 100mm Axial Ventilation Fan - Product Features Ensure that flexible duct connections are not over tightened to the spigots. To maximise the air flow, rigid ducting should be used where possible. The fan and ducting should be installed in accordance with the requirements of the Domestic Ventilation Compliance Guide, part of Part F of the Building Regulations.iCONsmart has several features included as standard and can also be fitted with digital micro modules to give a range of extra control options. Standard Features

Do not place the fan near any direct heat sources, e.g. radiant heaters, or where the ambient temperature can exceed 40°C (104°F). Faced with an overwhelming choice of lens designs, materials and fitting techniques, today’s busy practitioners need a simple-to-fit, cost-effective RGP lens that delivers predictable results in the maximum number of patients, whether they’re new to RGP lens wear or accustomed wearers. Welcome toAirflow iCON15 - the new and more stylish face of ventilation. Recessed into the wall or ceiling, the powerful axial fan is a stylish, slim and unobtrusive fan for toilets, en-suites, bathroom and shower rooms.The Airflow iCON15 is ideal for toilets, en-suites, shower rooms and bathrooms. Recessed into the wall or ceiling, it is stylish and unobtrusive, even in the smallest of spaces. The circular design means no squaring up is required, adding to the already simple installation procedure.The Airflow iCON 15 is designed to provide ventilation levels that comply with the latest Building Regulations. The iCON fan is an efficient, stylish and unique ventilation solution for the modern home. The shutter design makes switching on and off almost silent and helps reduce external noise ingress. The iCON 15 is supplied for remote switching. Matching the required control functions (pull cord, timer, humidity, PIR, two speed) to the installation, simply means plugging in an interchangeable module into the iCON15 fan. SAFETY FIRST: ALWAYS ISOLATE THE FAN UNIT FROM THE POWER SUPPLY BEFORE DOING ANY WORK ON THE FAN / MODULE.Position the fan so cable entry and fitting holes align with those on the mounting surface. Feed through the cable and fit the fan. (Fig. 6) Tiling is a breeze with the circular cover flange, reducing the need to 'make good' and one wipe and the cover is clean. iCON 15 Fan With Kit T is supplied with adjustable timer module, 140 x 140 x 100mm white square fixed grille, 100mm x 3m PVC flexible hose and cable ties A range of installable modules are available to allow customisation of activation options. Additional modules sold separately.

Do not use household cleaners containing abrasives. Cleaning of the internal parts such as the impeller should be carried out by using a soft brush. Never clean any parts of the fan assembly by immersing in water or using a dishwasher. Make provision for the electric supply cable and wall plugs / appropriate fittings using the main body as a template. Level using guides below the L and R symbols. (see Fig. 6)

When the iCONsmart is first powered on, you will hear the initial reset for 10-15 seconds. This is normal and will also occur if the fan is in its reset mode. App Control and Setup The iCONsmart 15 is IPX5 rated and therefore it is suitable for mounting in bathrooms (in zone 1 and 2). Model above is for basic on/off switching. Choose an optional control module to upgrade fan for Pullcord, Timer, Humidity or Motion Sensing operation. Don’t forget to add the control module you want. Any module fits any fan. Its so iCON easy! Applications To replace the IPX cover, line up the L (Left) and R (Right) indicators on the main body of the fan (Fig. 6) with the L and R indicator on the IPX cover (Fig. 7). Lightly press the IPX cover onto the main body. PRHTM - Infrared - Passive infrared activation with adjustable humidity setting and adjustable timer overrun

Easy to install due to the core drilled hole and its twist on/off cover enabling it to be fitted and fixed easily with its single side entry fixing screw. All electrical installation must be carried out by an approved electrician in accordance with Part "P" U.K. Building Regulations and to the latest IET standards, or the appropriate regulations in the country of installation. For fans mounted in zones 1 & 2 as defined in BS 7671:2018, additional protection must be provided by a Residual Current Device (RCD) not exceeding 30mA as well as having an Arc Fault Detection Device (AFDD).Model above is for basic on/off switching. Choose an optional control module to upgrade fan for Pull cord, Pull cord with adjustable timer, Humidity, pull cord with timer overrun, motion sensor with timer overrun, Motion sensor/humidity/timer . Don’t forget to add the control module you want. Only low voltage module fits low voltage fans. It/s so iCON easy Applications: The model above is for basic on/off switching. Choose an optional control module to upgrade fan for Pullcord, Timer, Humidity or Motion Sensing operation. Don’t forget to add the control module you want. Any module fits any fan. Its so iCON easy! The ICON15 comes complete with cantilever fixing lugs enabling a recessed installation on uneven surfaces. Fan and ducting should be inspected and cleaned on a regular basis to maintain fan performance. The external housing of the fan can be wiped with a damp cloth. iCONsmart has been CB tested and FCC certified to demonstrate the thoughtful engineering behind the fan design. It has been awarded the TUV certification for its safety, functionality and quality.