Push the “X+/-“ Keys to move the cursor in the numeral area, and push the “Y+/-” keys to change the value, then push the “Enter” key to save the change, push the “Esc” key to invalidate the change. Max/Min power keys This function is to set the screen origin position, to choose different origin position, which can mirror the graphics on X/Y direction. The operation way as above mentioned. File Key Memory File

Set Origin 1/2/3/4: after the multiple- origin logic is enabled, you can stop the cursor at “Set as Origin 1/2/3/4”. Press the “Enter” key on the keyboard and the system will take the coordinate figures of current X/Y axis as the corresponding ones to the origin 1/2/3/4. Remote control: RDWorks includes a remote control feature that allows you to control your laser cutting or engraving machine remotely, either through a USB connection or over a network. Open the command prompt (type "cmd" in the start menu or in the Win + R search box). At the command prompt, type ipconfig, and press Enter. Your results will look similar to this:the power supply can deliver a maximum number of milliamps depending on the tube that it’s trying to control. RDWorks includes a wide range of features and tools for creating and editing designs for laser cutting and engraving, including vector graphics editing, raster image processing, layer management, and cutting and engraving settings. It also includes a preview and simulation function that allows you to see how your design will look and how the laser will move during the cutting or engraving process. Now, as I mentioned a few minutes ago, there are two vital connections out of CN5 that connect up to the Laser power supply. The laser machines will be equipped with unique configurations (only for machines on www.cloudraylaser.com) which have high stability and marking efficiency.

On-board system encryption control, onboard parameter storage, and file storage capacity of up to 256M Laser Tube Enable: when there are double laser tubes, user can enable laser 1 and laser 2 respectively. RDWorks is a software program used to create and control the operation of laser cutting and engraving machines. It is commonly used in the fields of woodworking, metalworking, and manufacturing. Some of the features and specifications of RDWorks include: Y Frame over size Work Paused - The design is too large or too close to the front or rear edge of the bed. Try centering the design on the bed or reducing the size of the design.The input signal end of step-servo motor driver employs the opto-isolator technology. For the step pulse signal, some isolate the side OC diode from cutoff to conduction (e.g. the valid falling edge of pulse signal inputted from the diode minus end) and some do so from conduction to cutoff (e.g. the valid rising edge of pulse signal inputted from the diode minus end). When the laser is a glass tube, if the used laser is outputted in the low-level form, this pin will be connected with the laser power enable end and used to control the ON/Off of laser.