Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

UniBond Ultra Force: these ready-mixed grouts make use of fibre technology for maximum durability, with top protection against moisture and mould to keep your grout looking its best for longer. Colour options include grey and navy blue, infused with glitter to bring sparkle to walls or floors tiled in porcelain, ceramic or natural stone

Apply the grout: load grout mixture onto your grout float and generously apply it to the gaps between the tiles. Using diagonal and firm strokes across the tile joints, make sure you press the grout fully into the grooves so it’s filled to the top and evenly distributed. To ensure complete coverage, we’d suggest applying grout to small areas, working your way logically along. Expansion and movement joints on walls and floors must never be filled with Mapei Ultracolor Plus. Use a suitable flexible sealant from the MAPEI range.

For Mapei, “zero impact on climate change” means that CO 2 emissions measured throughout the life cycle of ULTRACOLOR PLUS using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. Designed for grouting floors and walls in commercial areas subject to intense traffic as well as residential areas Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth. From our carrier you will receive a text message on the day of the delivery with a 2 hour delivery window. If there any changes or delays you will receive an update via text. AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO , SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD AND TQ.

Sponge down the area: using clean water and a damp (not wet) sponge or sponge float, wipe down the tiles and grout lines to remove the remaining grout, ensuring the grout lines have a smooth, even finish. Unglazed klinker tiles should be grouted with the same colour tone Kerapoxy. All other colours should be used only with glazed tiles. Tiles Direct is your one-stop tiling shop, which means we won’t just help you find the perfect tile for your interior design project - we also have a raft of additional tiling accessories, including Mapei tile grout, to ensure you get a professional and long-lasting finish. Grouting of surfaces where a high protection against the formation and proliferation of micro-organisms is required. Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh.Always carry out preliminary tests before grouting stone or ground porcelain with a porous or rough surface. Use a flexible sealant from the MAPEI range (such as Mapesil AC, Mapesil LM or Mapeflex PU45) for flexible expansion joints or for joints subject to movement. Bonding special pieces of tiles. Kerapoxy CQ may also be used to grout unglazed klinker, stone, polished porcelain or porcelain in contrasting colours. Always apply a small sample of the product in a trial area before using Kerapoxy CQ on wider surfaces. Mapei Kerapoxy Epoxy Tile Grout allows you to create floors, walls and worktops, etc. in compliance with the HACCP system and the requirements of EC Regulation No. 852/2004 regarding hygiene and foodstuffs.

Kerapoxy CQ does not guarantee perfect bonding if the edges of the tiles are wet or contaminated with cement, dust, oil, grease, etc. during grouting. For interior and exterior wall and floor grouting of ceramic tiles, porcelain, terracotta, stone material, glass and marble mosaics When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout. Mapei Ultracolor Plus creates water repellent grout joints that have excellent colour uniformity. All colours are resistant to UV rays and atmospheric agents.

Delivery & Returns

Due to insurance and health and safety regulations we are unable to transport goods into a Customer’s property For a solid all-in-one grout option, the Mapei Ultracolor Plus Grout boasts excellent water-repelling properties that arere suitable for tile joints of 2mm up to 20mm. It’s also polymer modified, anti-efflorescence and rapid setting - not to mention equipped with anti-mould and drop effect technology, helping to prevent moisture intrusion and erosion over time, wherever you use it.