KREG KMA3200 Shelf Pin Drilling Jig

Product Information

Once your DIY shelf pin jig is prepared, align the pegboard with the edge of the cabinet side where you want to drill the holes. To prevent the pegboard from moving while you drill, clamp it securely in place. Make sure the clamps don't obstruct the areas where you plan to drill. Drill the shelf pin holes If you’re adding shelf pin holes to an existing piece of furniture or building shelves from scratch, the Shelf Pin Jig is the perfect tool for the job. Unlike other shelf pin guides, the KregShelf Pin Jig features hardened-steel drill guides that ensure precise and straight drilling, so you’ll get level, wobble-free shelves.

If you prefer a DIY approach, you can create your own jig using a piece of pegboard. Pegboards have pre-drilled holes evenly spaced in a grid pattern, which makes them a perfect guide for drilling evenly spaced shelf pin holes. The design of the template is pretty simple, and long enough, so it’ll be a viable choice to use in larger projects. There are two rows of 11 holes provided on this template with a spacing of 32mm while each hole has a diameter of 1/4 inches. Clamp the jig in place to prevent it from moving. On an assembled cabinet, just butt it up to the inside of the top or bottom. If you're working with flat pieces, align the edge of the jig with the edge of the board on one end. Drill the first holesAnd, since there are two rows of holes available on this jig, one offers an offset distance of standard 37mm while the other one offers 64mm offset distance. The jig is designed to be highly practical, and it even comes with a high-end 1/4 inches drill bit as well.

Perfect for Building or Adding Holes to Existing Furniture.The compact size of the Shelf Pin Jig makes it perfect for adding additional shelf pin holes in existing furniture, as well as for building projects from scratch. Need more length for additional speed? Connect multiple Shelf Pin Jigs together with the included Jig Extender. As you might already know, each shelf pin jig template is designed to help woodworkers to make holes with proper spacing. However, the spacing between the holes is not the same usually in all the templates when you start comparing the options. While some templates come with 32 mm hole spacing, which is the standard size. But, in some projects, you would require making holes with smaller spacing. That said, shelf pin jigs with 25.4 mm or 1-inch hole spacing are also available in the market which you can consider buying. 4. Offset DistanceThe first step is to cut a piece of pegboard that matches the height of your cabinet side. You can also make it the same depth as the cabinet so you can do all the holes on a side at the same time! You typically don't need shelf pin holes all the way down the side of your cabinet sides, unless you plan on storing paper or other flat items. In general, you'll want at least six inches to get your hand in there comfortably. Talking about its design and build quality, the template is transparent and comes with pretty clean markings mentioned as well. Moreover, the quality of the template is very satisfactory and feels very sturdy in hand. versatile in use as a dowel template for edge-to-edge, corner butt and T-butt joints or shelf support holes

Starting with the design, the template comes with a transparent finish, so it’s easier for beginner users to work using this jig. In fact, the size of the template is quite decent as it offers about 11 holes of 1/4 inch diameter.

One of the first things you need to consider when drilling shelf pin holes is selecting the right size drill bit. The size of the drill bit should match the size of your shelf pins to ensure a snug fit. Here are some tips for finding the correct size:

If your cabinet is already assembled, it's easy to know which end is up. But if your cabinet is in pieces, make sure to mark which is the top on each of the side pieces. You don't want to start at the bottom on one side and at the top on the other! I always mark the top with a piece of painter's tape. Set the depth stopIn case you are a professional woodworker and want a high-end shelf pin jig for your workspace, EZ Align offers one of the best high-end jigs in the market for professionals. Before you do anything else, mark which end of the pegboard goes up! Circle the holes you plan to drill, so you don't have to count up or down every time. You can also skip every other hole for wider spacing. There are several jigs available on the market, such as the Kreg shelf pin jig. These jigs come with drill guide holes, ensuring that your bit stays straight and the holes are evenly spaced and the correct depth. Test the fit: Before drilling all the holes, it's wise to do a test run on a scrap piece of wood. Drill a hole with the chosen bit and insert the shelf pin to ensure the fit is secure and snug. I usually skip the first three or four holes, but make sure you drill at least one! You'll need this hole for the set pin on the next batch. Drill through the jig's holes using the drill bit until it hits the depth stop collar. Use the set pin to keep the hole spacing consistent