Honeywell T6360B1028 Room Thermostat, 230/240V, White, 1

Product Information

This is really for systems where there isn't an existing wired thermostat and the thermostat installation is from scratch. Of course, a step further up is to go 'Nest'-type which also gives you phone App control, but that's prob a step too far? This thermostat is designed to improve overall energy efficiency by allowing users to easily control the temperature of their space. However, it might be worth checking with Tado just in case they need to work in conjunction with a wireless receiver. y -to-wire terminals with built-in conductor clamps to ensure wiring is retained securely • Double insulated.

Honeywell Home T6360B1028 Room Thermostat 240V 10Amp

That does sound like a faulty 'stat all right, tho' I guess other things could cause similar symptoms (tho' not sure what! The wired receiver can be connected at any convenient point, usually next to the boiler, and then the thermostat can be positioned in the best location without the need to run a new cable out to it. It can be easily installed and wired, making it a convenient choice for both professional installers and DIY enthusiasts.

Where there is a hot water storage cylinder, then the wired receiver would replace the existing programmer.

Wiring on Honeywell T6360 room stat | DIYnot Forums Wiring on Honeywell T6360 room stat | DIYnot Forums

I'm not very experienced in matters of electricity so to make things easy for myself, I simply bought a brand new one (i.However if you did want to use the wireless version, unless you were happy to have the control box on the wall where the existing thermostat is then it would need rewiring.

Honeywell T6360 Replacement Dial - Heating Controls Online Honeywell T6360 Replacement Dial - Heating Controls Online

Overall, this thermostat is a reliable and cost-effective way to manage the temperature of any space, promoting energy efficiency and comfort. Might not be that difficult to someone who knows what they are doing but the guy didnt know the difference between a live and neutral even with the diagram. Currently, the earth wire (yellow/green) goes to the earth connection, neutral (blue) goes to connection 3 and the live (brown) wire goes to connection 1. The Honeywell T6360 is a programmable electronic room thermostat used to control heating within a domestic or small commercial environment. However from your description it sounds as if you may have the version with the separate wired control box like this.The equivalent function would be realised by doing what you suggest, however I strongly suggest you change it so that the white wire replaces the green/yellow wire (at both ends), and the green/yellow is used solely for the protective earth. uk/honeywell-home-t6360b-room-thermostat-wired-230v-12128/ 28503 Honeywell Home T6360B Room Thermostat Wired - 230V https://www. Designed with efficiency in mind, the Honeywell T6360 incorporates advanced temperature sensing technology to accurately measure room temperature.

Honeywell T6360B1028 Room Thermostat, 230/240V, White, 1

Also, if there isn't a neutral connection made to terminal 2 of the Honeywell T6360B [some installations have this connection and some don't] again some rewiring would be required. If you would like to change your settings or withdraw consent at any time, the link to do so is in our privacy policy accessible from our home page. Unfortunately the colours of wires are meaningless as they would have been chosen by the original installer and as earlier posts show some don't always make a sensible choice.

With an easy-to-use dial interface, the Honeywell T6360 allows users to adjust the temperature according to their preference. Wired for simple fitting on a wall or switch box, this thermostat has a heat anticipator for close temperature control and is also capable of running cooling systems as well as heating.